Welcome to theUser Infopage. This page contains information to help you program up your radios to utilize the KØMDG repeater systems. You can program your radio to operate on one repeater, to operate cross band between repeaters and to gateway to another D-Star system via the internet.
Registration has changed with the new G2 Gateway. Please open and follow the instructions in the MDG Registration Instructions document on the right. NOTE: until DNS updates, the link may not work. If you have any questions or problems with registration, email the system administrator at admin@modigitalgroup.org. The system administrator will validate and approve you registration.
To check for activity on our systems and others throughout the world, go to dstarusers.org.
Programming Your Radio
The User Radio Programming Information Sheet provides frequency and memory channel programming information. MDG recommends that you program up the memory channels in your radio to allow you to quickly switch from single band to cross band operation. We have even provided a suggested memory channel naming convention to help you keep track of which cross band operation is programmed. Many of our users have found that without memory names, you can easily get lost!
The D-PRS Programming Information Sheet provides information on how to program you radio to report position information up to the Internet.
Data Setup Information The files at the right provide helpful information on setting up your computer for both low speed and high speed data communication via D-Star. The "Setting Alternate IP" shows how to set your computer for a alternate static IP address that is used if DHCP is not available.
